liberty appliance repair logo

Tips for DIY Gas Dryers Repair in Langley

Facebook
Twitter
LinkedIn

Malfunctioning appliances are something no wants to spend time or money having to deal with, but unfortunately, these types of situations are a fact of life. Not to fret however, many common gas dryer problems can be troubleshot with a little time and know how. Here are a few tips on locating common gas dryer fails, such as a dryer that won’t heat, that you can repair on your own. For larger problems, or if you are unsure of the issue, it is best to call a gas dryers repair in Langley professional before you risk causing further damage to your machine.

  • Gas Dryer Ignitor. If your dryer isn’t heating, the number one culprit is probably your ignitor. The ignitor is responsible for producing heat that lights the gas that comes from the burner valve. Most gas dryers have a small panel located at the back from which you can easily observe the dryer ignition. If the ignitor is working correctly, you should see the igniter glow before it cuts out and the flame lights. If the ignitor isn’t glowing, it is likely your cause. Ignitors can be readily found at most hardware stores, just be sure to unplug your machine and turn off the gas before attempting a DIY repair. If you are uncomfortable replacing the ignitor yourself, contact a professional for gas dryers repair in Langley.

 

  • Thermal Fuse. If your dryer simply will not run or is producing no heat and you have already checked that the pilot light is lit, the cause may be the thermal fuse. The thermal fuse is a safety measure designed to cut electrical contact if the dryer becomes too hot. The fuse can sometimes burn out due to a build up of dust and lint,or there could be an issue with your thermostat. To check, first locate the fuse at the back of the machine; all machines differ, and you may need to refer to the owner’s manual to know exactly where to look. Once you have located the fuse, the safest method of checking for electrical current is to use an electrical multitester (available at any hardware store). A reading of infinity indicates the fuse is fine, anything under indicates the fuse has been blown and needs to be replaced.

These are simple causes and fixes to a common gas dryer malfunction. Before attempting any repairs on your own, make sure you have taken all necessary safety precautions. For larger problems, the repairs are best left to someone experienced with gas dryers repair in Langley, before a relatively simple fix turns into a much bigger problem.

Facebook
Twitter
LinkedIn

Recent Posts